While it’s easy to ignore that dripping faucet in your en suite, there is a chance that the leak could be indicative of a broader problem. The last thing you want is an issue with your pipes coming into the holiday season and summer break. If you’re noticing small, little worrying signs, then check out this guide on hot water plumbers in Canberra for further information.
How it works
Your home’s drainage system is comprised of two smaller subsystems. One system brings in fresh aqua, while the other takes waste and sewerage out. However, with the help of hot water plumbers in Canberra, there is no need for you to have an in-depth knowledge of your home/apartment’s drainage system.
Having said this, if you are interested, then here’s a brief overview. Firstly, the liquid enters your home at high speed/pressure, which allows it to move vertically and horizontally. As it comes into your property’s system, it passes through a metre, which measures how much you are using. There is a valve located close to the metre, which you can deploy should you encounter an emergency (like a pipe bursting and causing massive flooding).
Nonetheless, some systems have localised emergency stops attached to specific outlets, like a basin, toilet or bathtub. If this is the case, you can turn off that emergency stop without ending your entire supply. If you’re not sure where your individual emergency stops are, then leave this work to hot water plumbers in Canberra.
What about warm liquid?
Ask your local hot water plumbers in Canberra, and they’ll tell you that the immediate aqua supply fulfils cold aqua needs only. For the liquid to be heated, it travels down a pipe that takes it to the gas cylinder or heater device (there are many to choose from). From here, the heated liquid is then stored and transported to all necessary fixtures, faucets and outlets that require it. You can monitor and maintain the temperature of the heater via the thermostat. If you want to save money or be more economical, lower the temperature of the heater and see how much you save.
Signs you might need help
Some of the most innocuous and subtle signs can be the most detrimental and severe. Here are some of the most common situations in which you probably need help from hot water plumbers in Canberra.
Slow draining basin
Some basins naturally drain quite slowly (depending on design), so it’s not necessarily a cause for concern. However, if you notice your sink taking longer and longer to drain, then you most likely have a blockage somewhere along the pipe. Before calling a professional, try using a drain cleaner to see if you can remove the blockage. If that fails, it’s time to get in touch with one of the hot water plumbers in Canberra for professional assistance.
A running toilet that won’t stop
If your toilet continues to run for several hours after flushing, then we recommend getting it checked out by one of the hot water plumbers in Canberra. It’s an issue that can creep up on you without notice before suddenly you have a flooded toilet. A running toilet will also see your utilities bill rise, so from a financial point, it’s worth getting it fixed as soon as possible.
The chances are that the seal in your toilet has broken (the one that connects the tank to the bowl), which is causing the leaking. Thankfully, there are heaps of hot water plumbers in Canberra that can fix this problem for you without any hassles.